Rubén Costa, head of the research group on hybrid optoelectronic materials and devices at IMDEA Materials, has been selected as one of the Top Spanish Talents by the MIT Technology Review. He will be competing for a spot among the final list of Innovators Under 35 Europe 2017. Rubén
Prof. Carlos González, head of the research program on the "Next Generation of Composite Materials" at IMDEA Materials Institute, has been appointed Full Professor at the Department of Materials Science of Polytechnic University Madrid (UPM), in which he was an Associate Professor. Our
Last Friday, June 30th, the Director and Deputy Director of the Institute gave the awards to the winners of the 2016 edition of the IMDEA Materials Imaging Contest. From left to right: Jose Luis Jimenez, Miguel Ángel Valdés, Daniel del Pozo and Miguel Monclús. The winners of this year in the
Jingya Wang, Research Assistant at IMDEA Materials Institute, received the award to the best poster entitled “Computational Study of Atomic Mobility in HCP Mg-Al-Zn Ternary Alloys and Anisotropic diffusion in hcp Mg-Al alloys” at the International CALPHAD Conference. This Conference was first held
The MICROMECH II project is the follow up of the Clean Sky MICROMECH project and is focused on the development of more elaborated micromechanical models for Inconel 718 alloy (casted and forged). Check the whole description of the project.
Are you a researcher interested in carrying out your research with us?, do you want to apply for a Marie Sklodowska-Curie Individual Fedllowship?. We have a selection of projects for your consideration!
Back in 2007, the European Commission established the European Research Council (ERC) with the mission to encourage excellent frontier research in Europe through competitive funding, supporting top researchers across all fields and of any nationality. Since then, the ERC has had a considerable
On April 28th, Javier LLorca stepped down as Director of IMDEA Materials Institute, after 10 years in this position. The newly appointed Director is Ignacio Romero, formerly Deputy Director of the Institute, and head of the Computational Solid Mechanics Group. Dr. Romero is Full Professor at the
Take a moment to read this interview (in Spanish) with Rubén Costa, who is heading a new research line in the field of lightning and energy generation technologies.
The past 4th of May, IMDEA Materials Institute took part in the “Graphene Market Place” event, organised by Airbus in Getafe (Madrid), which counted with the participation of the 2010 Physics Nobel Prize, Konstantin Novoselov. Novoselov gave a talk in which besides explaining the simple exfoliation
The outcome of the research activities performed during year 2016 is summarized in this document. The personnel, current research projects, research infrastructures as well as disseminations activities (publications, conferences and seminars, patents, theses, etc.) can be found in this annual report
Abstract: The mechanical behavior of heterogeneus materials such as composites, polycrystals or cellular materials, depends on their actual microstructure. Computational homogenization is a powerful tool that allows to link macroscopic behavior with microstructure by solving a boundary value
You can read our view on advanced simulation tools for Fibre-Reinforced Polymers in JEC Magazine (Issue #111 - March 2017, pp. 110 - 111)
The CRASHING II project is the follow up of the Clean Sky CRASHING project and is focused on the modelling and simulation of the crashworthiness of and aircraft front fuselage using numerical composite material models developed in the initial project. The cabin model will be simulated in different
An interview of Dr. Vinodkumar Etacheri, head of the Electrochemical Energy Storage group at IMDEA Materials Institute (Madri+d, in Spanish only)
Dr. Juan José Vilatela, Senior Researcher at IMDEA Materials, joins the Editorial Board of Scientific Reports. Scientific Reports is an online, open access journal from the publishers of Nature. It publishes scientifically valid primary research from all areas of the natural and clinical sciences.
J. Carlos Fernández-Toribio There is a clear evidence that composites are an increasing field of interest. Thus, the demand for composites end products has reached 22.2$ billion in 2015 . This is due to their low weight and high mechanical resistance. Therefore, lighter structural parts can be
Dr. Teresa Pérez Prado, Senior Researcher at IMDEA Materials, has been elected Board Member of the Spanish Society for Materials (SOCIEMAT). The mission of the Spanish Society for Materials (SOCIEMAT) is to foster and disseminate the important research and development efforts carried out in Spain in
Driven by the Spanish Ministry of Economy, Industry and Competitiveness (MEIC), Technological Platforms are public-private team-work structures led by the industry, in which all the stakeholders of the Science-Technology-Innovation Spanish system interested in a given technological field, work
Clean Sky Joint Undertaking 2 This project will develop revolutionary lightweight electrical energy storing composite materials for future electric and hybridelectric aircraft. Building on previous research in novel lightweight supercapacitor composites, structural battery and structural energy
Source(s): IMDEA Materials, Arcelor Mittal Within the framework of the coordinated project ACERCOM, coordinated by Arcelor Mittal, IMDEA Materials Institute will mainly carry out the modeling, fabrication and characterization of fiber metal laminates for application in marine wind energy. See the
A. García-Junceda, M. Campos, N. García-Rodríguez, J.M. Torralba. On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels. Metallurgical and Materials Transactions A 47, 5325–5333,
Source(s): IMDEA Materials, Composite Structures E. I. Saavedra, S. Haldar. Micro-macro mechanical relations in Palmetto wood by numerical homogenisation. Composite Structures 154, 1-10, 2016. DOI: 10.1016/j.compstruct.2016.06.050
Metallurgical and Materials Transactions A A. García-Junceda, M.J. Santofimia. Symposium on New steels for applications under extreme conditions. Metallurgical and Materials Transactions A 47, 5271–5271, 2016. DOI: 10.1007/s11661-016-3766-2
Source(s): IMDEA Materials, Composites Science and Technology M. Jalalvand, G. Czél, J. D. Fuller, M. R. Wisnom, L. P. Canal, C. D. González, J. LLorca. Energy dissipation during delamination in composite materials - An experimental assessment of the cohesive law and the stress-strain field ahead of
Source(s): IMDEA Materials, Metallurgical and Materials Transactions A S. Amirkhanlou, M. Rahimian, M. Ketabchi, N. Parvin, P. Yaghinali, F. Carreño. Strengthening mechanisms in nanostructured Al/SiCp composite manufactured by accumulative press bonding. Metallurgical and Materials Transactions A
DIMMAT Project has published the new "Designing advanced materials in a faster and more effective way" (Diseñar materiales avanzados de manera más rápida y efectiva) in the industrial magazine "Metales y Metalurgia" This project is funded by the Comunity of
Dr. Juan José Vilatela, leader of the research program on "Nanomaterials for Multifunctional Applications" at IMDEA Materials, has received the young investigator award from the European Society of Composite Materials (ESCM). This award recognizes the accomplishments of a young researcher who has
Dr. Irene de Diego Calderon has received the Young Academics’ European Steel Award from the Association of German Steel Manufacturers (VDEh) for her PhD thesis “Mechanical properties of advanced high-strength steels produced via quenching and partitioning”, which has been
An arc furnace is now available at IMDEA Materials Institute. This equipment (Arc 200, Arcast Inc.) allows melting, alloying, casting, rapid solidification and atomization of reactive and high melting point elements and alloys up to 3500°C using a clean ceramic free cold crucible process.
Position: Research Asistant (visiting) MSc.: University of Science and Technology Beijing, China Research: Metal matrix composites
Position: Research Associate PhD: University of Girona, Spain Research: Modelling of non-conventional composites Contact: olben.falco(AT)imdea.org
The general objective of this project is the development of micromechanical characterization techniques at high temperature for the study of strong nanoscale multilayered materials. See HOTNANOMECH project description
Position: Visiting Scientist Research: Computational Solid Mechanics PhD: Berkeley, University of California, USA Contact: ignacio.romero@imdea.org
Machine used to disperse fillers and additives in viscous matrix. The shearing forces to break agglomerate are generated by three hardcrome-plated rollers that rotate at different angular velocities and where gap (minimum 5 µm) and speed setting are controlled electronically. More info
On November 11th, the kickoff meeting of the European project VACAST was held at IMDEA Materials facilities. The objective of the project is to develop the next generation of Ni-based superalloy nozzle guide vane (NGV) design and manufacturing capability for low pressure turbines of advanced
The atoms of metals are organized in ordered structures denominated crystal lattices. The geometry of the latter depends of the nature of the material as well as of temperature and pressure. At room temperature and atmospheric pressure, pure metals like gold, aluminium and copper have cubic
Javier LLorca, Professor of Materials Science of the Technical University of Madrid and director and founder of IMDEA Materials Institute has been elected to the Board of Directors of the Society of Engineering Science (SES). Founded in 1963, the Society of Engineering Science is a non-profit
FUTURALVE is a national R&D collaborative program carried out by a consortium of companies and led by ITP. The goal of the project is to create new materials and advanced fabrication technologies for the new generation of high speed turbines. Check FUTURALVE project description Check related
A Gel Permeation Chromatographer (GPC) is now available at IMDEA Materials Institute. The system (Waters) consists of a Waters 2414 refractive index detector, a Waters 2489 UV/Visible detector, a Waters 1500 column heater, and a series of Waters polystyrene GPC columns. It is used to determine
AMPI International (non-profit professional society which promotes the advancement of powder metallurgy (PM) and particulate materials as a science) recognizes the work of Prof. José Manuel Torralba (Deputy Director of IMDEA Materials). The 2015 AMPI fellow award recipients will receive
IMDEA Materials institute has an opening for a Researcher (tenure-track position) in the area of X-ray characterization of materials. More details and application process
Position: Research Associate PhD: Università di Bologna, Italy Research: Organic synthesis and multifunctional polymers Contact: carmine.coluccini(AT)imdea.org
Position: Research Associate PhD: Complutense University of Madrid, Spain Research: Synthesis of advanced materials based on carbon nanotube fibres Contact: belen.aleman(AT)imdea.org
Link to the complete new in Media Speech of the IMDEA Materials Institute Director (54.8 KB) Enlaces a otros medios: Consejería de Educación, Juventud y Deporte elEconomista.es madridiario.es
The group of Multifunctiional Nanocomposites of IMDEA Materials has started the research project DECOMP. The main idea of the project is to combine polymer matrices (thermoplastics, thermosets and elastomers) and nano-reinforced fillers (layered silicates/clay/carbon nanotubes) to produce
Polymer matrix composites are currently used in many structural applications that require a significant reduction in weight for energy and/or environmental reasons. However, despite all existing information and actual knowledge about these materials, their complex mechanical behaviour (highly
Research Associate: Novel processing of Fe-Al intermetallics. PhD: Autonomy University of Barcelona, Spain Contact: anna.hynowska@imdea.org
REDISH is an European project funded by the Clean Sky Joint Technology Undertaking 2 within the Horizon 2020 programme of the European Union. The goal of the REDISH project is the development and maturation of innovative shielding able to sustain impacts from high and low energy debris caused by
The PhD Thesis entitled "Mechanical Behavior of Hybrid 3D Woven Composites", carried out by Dr. Raúl Muñoz at IMDEA Materials Institute under the supervision of Dr. Carlos González and Prof. Javier Llorca, has been awarded by the Spanish Association of Composite
Position: Research Associate PhD.: Autonomous University of Barcelona, Spain Research: Monte Carlo simulation of epitaxial growth for semiconductors Contact: juanpablo.balbuena(AT)imdea.org
Position: HHRR Project Manager Contact: rosa.bazan(AT)imdea.org
The general objective of this project is to study the mechanical behavior of metal/ceramic multilayers at the nanoscale. See NANOLAM project description
Position: Proffesor Guangxi University, China Research: DFT/MD of thermoelectric/phase change materials
The status of Fellow is awarded to members who have contributed significantly to the advancement of mechanics and related fields and it was granted to Prof. LLorca in recognition for his contributions to understand the relationship between microstructure and mechanical properties of materials by
IMDEA Materials Institute has installed a Digital Image Correlation System (DCI) to perform non-contact full-field displacement mapping by means of images acquired by an optical system of stereographic cameras.
The main goal of the new initiative is to develop a new collaboration framework between the companies, universities, technological/research centers interested in promoting the growth and application of advanced materials and nanomaterials. The horizontal approach of the Platform includes within its
NABISCO project, funded by the China Scholarship Council, deals with the development of strategies to integrate macroscopic fibres and films of CNTs into structural laminate composites. The aim is to improve the mechanical properties of traditional fibre-reinforced polymer composites, while
The objective of this investigation, with a focus on the Co-base high temperature alloys and funded by the China Scholarship Council, aims at developing a robust high throughput diffusion couple technique. The new technique will enable fast mapping of such information as phase
Dr. De-Yi Wang, head of the High Performance Polymer Nanocomposites group at IMDEA Materials Institute, has been selected as Associate Editor of "RSC Advances" since October 2015. RSC Advances is a high impact journal of the Royal Society of Chemistry. RSC Advances is an international,
Position: Project Manager Degree in Industrial Electronic Engineering, University of León, Spain MBA: International University of La Rioja, Spain
Position: Research Asistant MSc.: Lomonosov Moscow University, Russia Research: Nanostructured supercapacitors Contact: evgeny.senokos(AT)imdea.org
Position: Research Associate PhD: V. Lashkarev Institute of Semiconductor Physics, Ukraine Research: Epitaxial growth of SiGe and III-V materials Contact: andrey.sarikov(AT)imdea.org
The goal of this research collaboration is to identify and select new material concepts for possible use and incorporation into the future rear fuselages which operate at high temperature. See Pre-HITMAAS project description
Guanglong Xu has been awarded with a CALPHAD scholarship as a PhD student to give presentation at the coming international conference CALPHAD XLII to be held at San Sebastian (Spain) next May 26-31.
The thesis entitled "Micromechanical Characterization and Simulation of the Effect of Environmental Aging in Structural Composite Materials” represents the first doctoral thesis fully developed at the IMDEA Materials facilities since its research activities started at the beginning of
IMDEA Materials Institute participates in the FP7 European project RADINTERFACE, which aims at constructing a bottom-up framework (advanced predictive tool) allowing discovery and quantifications of materials damage mechanisms and effects on mechanical properties for novel crystalline materials with
"If Spain wants to get out of the crisis and create employment, the only way is to invest in technology and innovation". Link to the complete text: Madri+d
Research Assistant: High-strength steels. Contact: miguelangel.valdes@imdea.org
Position: Postdoctoral Researcher Phd: Engineering Sciences Polytechnic school of Louvain, Université catholique de Louvain (UCL), Belgium Research "Virtual Design, Virtual Processing and Virtual Testing of Metallic Materials"
Various researchers from IMDEA Materials Institute participate in the following activities (ES): Investigadores en la empresa. European corner Dentro de la actividad Investigadores en la empresa. European corner tendreis la posibilidad de conocer a varios Investigadores
Position:Visiting Research Associate PhD.: Polytechnic University of Madrid Research: Computational solid mechanics Contact: david.portillo(AT)imdea.org
Position: Research Associate PhD: University of Manchester, UK Research: Crystal plasticity modeling Contact: david.gonzalez(AT)imdea.org
The High Performance Nanocomposites group lead by Dr. De-Yi Wang participates in COST action MP1105: Sustainable flame retardancy for textiles and related materials based on nanoparticles substituting conventional chemicals (FLARETEX). Dr. De-Yi Wang was appointed as the National Representative from
Position: Laboratory Technician Contact: miguel.delacruz(AT)imdea.org
The Multifunctional Nanocomposites group of IMDEA Materials Institute, led by Dr. Juan José Vilatela, has been awarded a prestigious Marie Curie Action Grant (CIG) to carry out a four-year research project on design and processing of Multifunctional Carbon Nanotube Fibre Nanocomposites. See MUFIN
Prof. Allison formerly was a senior technical leader with Ford Motor Co. He is recognized for contributions to automotive casting technology and computational materials engineering. Link to source new (Record Update, University of Michigan)
Airbus is already planning its A30X next generation aircraft to replace the A320, the standard Airbus jet airliner for short- to medium-range routes. The aircraft manufacturer has been evaluating new configurations through the European Union-funded Nacre (New Aircraft Concepts Research) project,
PhD: University of Monash, Australia. Contact: hong.liu@imdea.org
The defense of the PhD thesis of Francisca Martínez " "Multiscale analysis of the mechanical behaviour of needle-punched nonwoven fabrics" will take place on Friday, February 5th at 12 noon at the E. T. S. de Ingenieros de Caminos of the Polytechnic
Mr. Mehdi Rahimian will defend his PhD thesis entitled "Physical simulation of investment casting of Mar-M247 Ni-based superalloy" next Monday 13th of July, at 12:00 h in Carlos III University, (aula de Grados), Leganés Campus (Madrid).
Position: Research Assistant MSc.: Shanghai Jiang Tong University, China Research: New Generation Fire Retardant Materials Contact: zhi.li(AT)imdea.org
Size effect in LiF plasticity: new insights into the lattice resistance contribution - 16 Jun 2014
Javier LLorca, director of IMDEA Materials Institute and professor of Materials Science at the Polytechnic University of Madrid, has been elected to the Academia Europaea in the Physics and Engineering section. The election took place during the Academy Council held in Wroclaw on September, 16th.
Position: Lecturer Xiamen University, China Research: Mg alloys
IMDEA Materials Institute y Pennsylvania State University has signed a two years colaboration agreement to promote joint research and development activities in the areas of processing, charaterization and simulation of advanced materials. In addition, this agreement opens a new range of
IMDEA Material Institute and AIRBUS Operations has strengthened their scientific partnership with a new R&D contract. The project aims at developing advanced numerical simulations for metallic small fragments impacts on composite fuselage and shields for critical systems protection.
Dr. Jerusalem, head of the Computational Mechanics of Materials group, analyze the current situation of the continuum simulations in the materials field. Link to the complete text: Madri+d
NANOLAM project is part of a collaborative research effort between IMDEA Materials and Arizona State University in order to study the high temperature nanoindentation and micropillar compression behavior of Al/SiC nanolaminates. Check the whole description of the NANOLAM project
The objective of this investigation, funded by the China Scholarship Council, is to develop high performance reinforced fire-retardant polymers via special molecular design, chemical functionalization of the reinforced fibers and advanced polymer processing. The fire behaviours, mechanical
Position: Researcher Associate PhD: Physics, Universidad Autónoma de Madrid Research: "Thermodynamics and Atomistics
Our internationalization strategy, based on mid-long term partnerships with key companies, highlighted in madri+d website. Read the whole story (ES)
A fatigue testing system is now available at IMDEA Materials Institute. The system (INSTRON 8802, INSTRON) allows a broad range of static and dynamic test applications from basic metals to larger scale component testing. Typical applications of this servohydraulic machines include fracture
Position: Accounting Assistant Contact: vanessa.hernangomez(AT)imdea.org
Position: Research Associate PhD: Mondragon University, Spain Research: Multiscale plasticity Contact: aitor.cruzado(AT)imdea.org
Position: Research Associate University of Alicante, Spain Research: Al and Mg nanocomposites Contact: carmen.cepeda@imdea.org
See project description.
The Computational Mechanics of Materials group of IMDEA Materials Institute leads the European project SIMUCOMP which aims to help design and stress engineers assess the structural integrity and the damage tolerance of lightweight composite structures through provision of new accurate and predictive
"Only enterprises investing in technology will survive" Link to the complete text: Madridiario El profesor Javier Llorca, doctor ingeniero de Caminos, es catedrático y responsable del grupo de investigación en “Materiales Estructurales Avanzados y Nanomateriales” de la Universidad
Dr. De-Yi Wang has been recently elected Fellow of the Royal Society of Chemistry (RSC). Founded in 1841, RSC is the largest organization in Europe for chemical scientists and advancing the chemical sciences. RSC partners with industry and academia, advises governments on policy, and promotes the
Location
C/ Eric Kandel, 2
Tecnogetafe
28906, Getafe, Madrid (Spain)
