An X-ray diffractometer is now available at IMDEA Materials Institute. The system (Empyrean, PANalytical) allow for phase analysis, texture, and residual stress determination, as well as reflectometry. It is equipped with a state-of-the-art X-ray platform for the analysis of powders, thin films,

A Micro-scale combustion calorimeter is now available at IMDEA Materials Institute. This system, maufactured by Fire Testing Technology performs rapid laboratory scale test of the flammability of materials on milligram quantities (in the order of mg) according to standard ASTM D7309-07. Check the

Silicio Ferrosolar S.L., part of Ferroatlantica S.L. group, has signed an R&D contract with IMDEA Materials Institute to optimize the production of solar-grade silicon via purification in high vacuum furnace. More details on SICASOL project

MODENA is an European project funded by the 7th Framework Programme of the European Union. MODENA aims at developing, demonstrating and assessing an easy-to-use multi-scale software-modeling framework application under an open-source licensing scheme that delivers models with feasible computational

IMDEA Materials Institute has been awarded a new R&D contract by Airbus Operations to design composite shields against high energy impact of an open-rotor blade on the new NSA (New Single Aisle) aircraft fuselage concept. See BLADE IMPACT project description

See: Semi-cured products manufacturing project description

CRIRCEM proposes the design and processing by powder metallurgical routes of new materials for cutting tools with total substitution of the traditional cobalt binder by other more economic and less toxic. See the whole description of the CRIRCEM project

The defense of the PhD thesis of José Luis Gómez-Sellés entitled "Atomistic modeling of Ge damage accumulation, amorphization and solid phase epitaxial regrowth" supervised by Dr. I. Martín-Bragado and Dr. Javier Segurado will take place on Friday, January 15th

Rocío Muñoz, alumni of IMDEA Materials Institute, has received the 3rd prize in the 2014 Zwick Science Award for her paper entitled “Analysis of crystallographic slip and grain boundary sliding in a Ti–45Al–2Nb–2Mn (at%)–0.8 vol%TiB2 alloy by high

Whithin the framework of the coordinated project Ferro-GENESYS, IMDEA Materials Institute will model irradiation damage and nanoscale mechanical charaterisation in ODS FeCrAl and FeAl(Cr/Zr) heat resistant alloys. Ferro-GENESYS prokect is led by Dr. Ignacio martín-Bragado, head of the

As a part of the science week 2013, Dr. Ignacio Martín-Bragado was interviewed in a nationally syndicated radio program (España de vuelta y vuelta). He explained to the general public the aim and benefits of his group's research activities in the field of atomistic materials

Position: Research Assistant Polytechnic University of Madrid, Spain Research: Multiscale Plasticity Contact: daniel.rodriguez@imdea.org

IMDEA Materials Institute has designed and fabricated a mechanical stage for carrying out in-situ mechanical tests under X-ray radiation in computer assisted tomography systems. More info ….(+)

The results presented are part of two doctoral theses that are being carried out at the IMDEA Materials Institute within the framework of various research projects. On the one hand, Marcos Rodriguez presented a new methodology of micromechanical characterization of composite materials which is being

The main focus of the ICSMA conferences is to provide a forum to present and discuss the latest research on fundamental aspects of deformation, strength and fracture of all types of materials.

This project will study high strain rate mechanical behavior of novel Advanced High Strength Steels (AHSS). The results of these investigations will greatly contribute to understanding of mechanical behavior of the AHSS and help to reduce the dimensions of the AHSS components used in the automotive

IMDEA Materials Institute has been awarded a European Industrial Doctorate (EID) to train 2 PhD students together with Hexcel Corporation and Micro Materials Ltd in the field of dynamic behaviour of composite materials for next generation aeroengines. Job vacancies will

Prof. Javier LLorca, Director of IMDEA Materials Institute, leads this prestigious ERC Advanced Grant from the European Union. Prof. Llorca and his research group will receive develop multiscale modeling strategies along the next 5 years to carry out virtual design, virtual processing and virtual

The collaboration between IMDEA Materials and Fokker Aerostructures has just been showcased in NetComposites journal (link to the article in NetComposites). The bilateral project VIRTEST, headed by Dr. Claudio Lópes, will lead to an improved understanding of the material behavior and the

SIMUFOING is an industrial contract between Industria de Turbopropulsores S.A. (ITP) and IMDEA Materials Institute to develop new simulation techniques that can be used to predict damage on plane engines due to the ingestion of hail and birds. See all projects in the Integrated Computational

Position: Research Associate PhD: University of Navarra, Spain Research: Multiscale plasticity Contact: edison.bonifaz(AT)imdea.org

Position: Research Assistant Research: Micromechanics of intermetallic materials Contact: alberto.palomares(AT)imdea.org

Position: Laboratory Technician Contact: marcos.angulo@imdea.org

See SUPRA NiAl-LOYS project description.

This sixth edition of the CENIT programme, Strategic National Consortiums for Technical Research, has a total budget of 120 million Euros. 30 million will be granted each year to fund the 4-years projects during the period 2010-2013. 156 companies, of which 50,6% are SMEs, and 207 research groups,

The Science and Technology Forum of Madri+d of October is dedicated to the new materials and nanotechnology. The second session of this forum is an excellent opportunity to know the perspectives and new developments on Advanced Materials and Nanoscience. During this session the main research lines

Researcher: Electrochemistry. PhD: Dublin Institute of Technology. Contact: vinodkumar.etacheri@imdea.org

Position: Researcher Associate PhD: Mondragón University, Spain Research: "Testing and Simulation of Advanced

Position:  Senior Reseacher PhD:  University of Gdansk, Poland Research:  Computational and Data-Driven Materials Discovery Address:  C/ Eric Kandel, 2. Getafe, Madrid

Prof. José Manuel Torralba, Deputy Director of IMDEA Materials Institute and head of the Solid State Processing group, has been elected member of the Editorial Board of Powder Metallurgy Journal, an international journal publishing peer-reviewed original research on the science and practice

B/E AEROSPACE Inc., worldwide leading manufacturer of aircraft passenger cabin interior products, has signed a three-year long R&D contract with IMDEA Materials Institute to to develop innovative materials for aircraft interiors based on advanced polymers and macroscopic fibres. The aim is to

Position: Research Assistant MSc: Ferdowsi University of Mashhad , Iran Research: Multiscale modelling of PU foams Contact: mohammad.marvi(AT)imdea.org

Position: Research Associate Grenoble INP, France / Seoul National University, South Korea Research: Multiscale plasticity Contact: hyungjun.chang(AT)imdea.org

Researchers at IMDEA Materials Institute and members of the ESTRUMAT, programme have implemented new high temperature nanomechanical testing techniques. The objective is two-fold. On the one hand, these techniques are necessary to study size effects in the mechanical properties of materials,

The work presented “A mechanical model of neuronal growth” is part of his doctoral thesis supervised by Dr. Jerusalem, which is being developed within the framework of the Cajal Blue Brain Project.

The objective of this research project, funded by the EXPLORA program of the Spanish Ministry of Science and Innovation (MICINN) is to evaluate the possibility of stabilising, under ambient conditions, high pressure metallic phases by the simultaneous application of compression and shear. The good

In recent years, large spills from oil pipelines and tankers, leaks from nuclear reactors and the constant need for lighter, stronger, and safer materials in the transportation industry illustrate how breaks or cracks (fracture) can have detrimental effects in terms of health and safety, the

Organized by IMDEA Materials Institute and the Carlos III University of Madrid, was held in Leganés, on the campus of the University, between 14 and 18 December, the Congress in Advanced Materials and Processing Technologies AMPT2015. The congress was attended by 450 people from over 50 countries

Online RTM is a research collaboration between IMDEA Materials and AIRBUS Operations aiming at analyzing sensor information during Resin Transfer Molding (RTM) injection to assess the quality of composite parts. The incorporation of this new technology in the manufacturing process will lead to

Position: Research Associate PhD.: University of Maryland, USA Research: Experimental characterization and numerical modelling of composites Contact: sandip.haldar(AT)imdea.org

Position: Research Assistant MSc: Technical University of Madrid, Spain Research: High performance nanocomposites Contact: sergio.dejuan(AT)imdea.org

Research Associate - Charaterization of advanced materials

ITER (acronym of International Thermonuclear Experimental Reactor) is an international nuclear fusion research and engineering project, which is currently building the world's largest experimental tokamak nuclear fusion reactor at the Cadarache facility in the south of France. The ITER project

Two research groups of IMDEA Materials Institute, Metal Physics and Nanomechanics led by Dr. Teresa Pérez-Prado and Dr. Jon Molina respectively, participate in the ambitious large EU funded EXOMET Project, coordinated by the European Space Agency. This four years project aims at developing new

This device alloys to analyze in real time the deformation, recrystallization and fracture mechanisms operative in these materials in different conditions of temperature and strain rate. Thus, it allows to obtain very valuable information regarding the kinetics of all these mechanisms, a difficult

“The main challenge is in the tuning of polymer nanocomposites depending on the application”. Link to the complete text: Madri+d

Research Assistant: Integrated Computational Materials Engineering. Contact: evamaria.andres@imdea.org

As recognition of his scientific experience, he has been distinguished as Guest Professor of this University regarded as one of the 20 most important in China. He will advise  the university on research and internationalization strategies. Check the complete text in the website of the

IMDEA Materials has received the “HR Excellence in Research” award, which acknowledges our institute as a provider of a stimulating and favourable work environment. The award reflects our commitment to continuously improve human resource policies in line with the European Charter for

Position:  Research Assistant MSc: Delft University of Technology Research: High temperature deformation behaviour of Cu/Nb nanoscale metallic multilayers

The paper entitled "Understanding the contribution of the microstructure in the fracture behaviour of sintered steels" by Prof. José M. Torralba, Deputy Director at IMDEA Materials Institute, has been awarded EPMA Keynote Paper at Euro PM2014 Conference. Euro PM2014

DMAPOL is an industrial contract between ACCIONA Infraestructuras and IMDEA Materials Institute to perform Dynamic Mechanical Analyses (DMA) in polymeric materials. See DMAPOL project description

Position: Research Assistant Research: Fire Retardant Polymeric Materials Contact: yetang.pang(AT)imdea.org

Position: Research Assistant Carlos III University of Madrid, Spain Research: High Energy Impact on Aeronautical Composite Structures Contact:

Site visit to the IMDEA Materials Institute headquarter building, January 10th, 2012

Hotnano will work on overcoming the instrumental limitations to apply nanoindentation, nanocmechanics characterization technique, at high temperatures to a range of structural materials, from advanced composites to nanostructured metals and ceramics. Link to Project: HOTNANO.-High temperature

Dr. Teresa Pérez Prado, PhD in Physics, Complutense University of Madrid, 1998. Dr. Pérez Prado joined the University of California in San Diego (UCSD, USA) as a Postgraduate Research Engineer in 1998. She was also hired as a consultant at Oregon State University (USA). In 2001 she

F. Sket, A. Enfedaque, C. Díaz López, C. González, J. Molina-Aldareguía, J. LLorca. X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear. Composites Science and Technology 133, 40-50, 2016.